Solution Description
Solution Software
GCS conveyor pully is made as for each consumer need, with major design unfer national standard, high quality inspection concentrating on shaft core, welded joint, rubber materials and hardness, dynamic harmony and so on for longer item life time.
Item Attributes:
Conveyor Pulley is the main transmission belt conveyor components, there are two kinds of driveroller and the bend pulley, driving pulley may be made upon request, smooth or castrubber tread surface.
one . Simple set up and good flexibility
2 . Robust force of friction, low vibration
three . Dust-proof and water-proof, both acid and alkali have no effect to our conveyor pulley
four . Fantastic welding technique ensures roller with reduced vibration and sounds
5 . Rigorous inspection regular ensures our higher good quality processing
6. Stable running and min 50,000 hours normal life time.
Complex Parameters: (The diameter can be manufactured as requires.)
| Driving Pulley (rubber area) | |
| Belt Width | Common Diameter of Pulley |
| 500 mm | 500mm |
| 650 mm | 500mm,630 mm |
| 800 mm | 500mm,630mm,800mm,1000mm,1250mm,1400 mm |
| a thousand mm | 630mm,800mm,1000mm,1250mm,1400 mm |
| 1200 mm | 630mm,800mm,1000mm,1250mm,1400 mm |
| 1400 mm | 630mm,800mm,1000mm,1250mm,1400 mm |
| 1600 mm | 630mm,800mm,1000mm,1250mm,1400 mm |
| 1800 mm | 630mm,800mm,1000mm,1250mm,1400 mm |
| 2000 mm | 800mm,1000mm,1250mm,1400 mm |
| 2200 mm | 1000mm,1250mm,1400 mm |
| 2400 mm | 1000mm,1250mm,1400 mm |
| Bend Pulley (smooth surface & rubber surface) | |
| Belt Width | Regular Diameter of Pulley (mm) |
| five hundred mm | 250,315,four hundred,five hundred |
| 650 mm | 250,315,four hundred,five hundred,630 |
| 800 mm | 250,315,400,five hundred,630,800,1000,1250 |
| a thousand mm | 250,315,400,five hundred,630,800,1000,1250,1400 |
| 1200 mm | 250,315,four hundred,five hundred,630,800,a thousand,1250,1400 |
| 1400 mm | 315,four hundred,five hundred,630,800,one thousand,1250,1400 |
| 1600 mm | four hundred,500,630,800,1000,1250,1400 |
| 1800 mm | 400,500,630,800,a thousand,1250,1400 |
| 2000 mm | five hundred,630,800,a thousand,1250,1400 |
| 2200 mm | 630,800,a thousand,1250,1400 |
| 2400 mm | 800,1000,1250,1400 |
In a dual pulley technique, this ratio is equal to the reference diameter of the output pulley being greater than the reference diameter of the input pulley. It really is fairly straightforward as extended as you determine the gear ratios for a far more complicated pulley method action by action. For multiple pulleys, the ratios of the different elements of the mechanism need to be calculated to decide the all round ratio. In the image previously mentioned, the reference diameter of the decrease travel wheel is 20mm, the radius of the higher wheel is 40mm, and the ratio is 2:1. 2 spins on the lower wheel and 1 spin on the higher wheel. The gear ratio also tells us something about the torque of the system since the ratio of output torque to enter torque is equal to the gear ratio. Therefore, the torque utilized to the higher wheel is 2 times as fast, but the velocity is halved.
We have a extensive 1/2″ rope capacity pulley for useful redirection, light rigging, rescue, and mechanical gain systems. We have much more pulleys in the following backlinks many of them also make as excellent as the types under Modest pulley.
