Item Description
Head Sheave/ Sheave Pulley/Lifting Gear Xihu (West Lake) Dis. Wheel Unit
Introduction:
Mine hoist can be divided into 2 varieties 1 variety is JKE sequence single rope mining CZPT and the other is Multi-rope friction hoist.
This series mine CZPT like 2m-5m solitary tubular and double tubular sorts, and can be employed for mining hoist, staff lifting and material and tools descending from vertical shafts or inclined shafts of coal, metallic and nonmetal ores.
JK mine hoist is mainly used in inclined roadways and wells of coal mines, metal mines and non-metal mines to hoist or lower personnel and materials.
Technological parameters:
| Model | Drum | Tension PF |
Tension Differe |
Rope Diameter |
Lift peak (m) | Max Pace |
Reduce speed ratio |
Motor Pace |
||||||
| Number | Dia | Width | 1-layer | 2-layer | 3-layer |
|||||||||
| m | KN | mm | m | m/s | r/min | |||||||||
| JK-2×1.5/20 | 1 | 2. | 1.5 | 62 | 24 | 305 | 650 | 1571 | 5.two | 20. | 1000 | |||
| JK-2×1.5/31.5 | 31.5 | |||||||||||||
| JK-2×1.8/twenty | 1.eighty | 375 | 797 | 1246 | 20. | |||||||||
| JK-2×1.8/31.five | 31.5 | |||||||||||||
| JK-2.5×2/20 | 2.5 | 2.00 | 83 | 28 | 448 | 945 | 1475 | 5. | twenty. | 750 | ||||
| JK-2.5×2/31.five | 31.five | |||||||||||||
| JK-2.5×2.3/20 | 2.30 | 525 | 1100 | 1712 | twenty. | |||||||||
| JK-2.5×2.3/31.five | 31.five | |||||||||||||
| JK-3×2.2/20 | 3. | two.twenty | 135 | 36 | 458 | 966 | 1513 | six. | 20. | |||||
| 2JK-2×1/11.two | 2 | 2. | 1.00 | 62 | 40 | 24 | 182 | 406 | 652 | 7. | eleven.two | |||
| 2JK-2×1/20 | 20. | |||||||||||||
| 2JK-2×1/31.5 | 31.5 | |||||||||||||
| 2JK-2×1.25/eleven.2 | 1.twenty five | 242 | 528 | 838 | eleven.two | |||||||||
| 2JK-2×1.twenty five/20 | twenty. | |||||||||||||
| 2JK-2×1.twenty five/31.5 | 31.five | |||||||||||||
| 2JK-2.5×1.2/eleven.2 | 2.five | 1.20 | 83 | 65 | 28 | 843 | 8.eight | 11.two | ||||||
| 2JK-2.5×1.2/20 | twenty. | |||||||||||||
| 2JK-2.5×1.2/31.five | 31.5 | |||||||||||||
| 2JK-2.5×1.5/eleven.two | 2.5 | 1.50 | 83 | 65 | 28 | 319 | 685 | 1080 | 8.8 | 11.2 | ||||
| 2JK-2.5×1.5/twenty | twenty. | |||||||||||||
| 2JK-2.5×1.5/31.5 | 31.five | |||||||||||||
| 2JK-3×1.5/eleven.two | 3. | 135 | 90 | 36 | 289 | 624 | 994 | 10.5 | eleven.2 | |||||
| 2JK-3×1.5/twenty | 20. | |||||||||||||
| 2JK-3×1.5/31.five | 31.five | |||||||||||||
| 2JK-3×1.8/eleven.2 | 1.eighty | 362 | 770 | 1217 | eleven.two | |||||||||
| 2JK-3×1.8/20 | twenty. | |||||||||||||
| 2JK-3×1.8/31.5 | 31.5 | |||||||||||||
| 2JK-3.5×1.7/11.two | 3.5 | 1.70 | 170 | 115 | 40 | 349 | 746 | – | 12.6 | 11.two | ||||
| 2JK-3.5×1.7/20 | twenty. | |||||||||||||
| 2JK-3.5×2.1/11.2 | 2.ten | 450 | 950 | – | 11.two | |||||||||
| 2JK-3.5×2.1/11.two | 20. | |||||||||||||
| 2JK-4×2.1/ten | 4. | 245 | 160 | 48 | 421 | 891 | – | 12.6 | ten. | 600 | ||||
| 2JK-4×2.1/11.2 | 11.2 | |||||||||||||
| 2JK-4×2.1/20 | twenty. | |||||||||||||
| 2JK-5×2.3/ten | 5. | 2.thirty | 280 | 180 | 52 | 533 | – | – | 12 | 10. | 500 | |||
| 2JK-5×2.3/eleven.two | ||||||||||||||
Possible defects:
| Defect | Causes |
| Unfilled sections | Insufficient material Low pouring temperature |
| Porosity | Melt temperature is too high Non-uniform cooling rate Sand has low permeability |
| Hot tearing | Non-uniform cooling rate |
| Surface projections | Erosion of sand mold interior A crack in the sand mold Mold halves shift |
FAQ
Q: How about the top quality of your items?
A: Our machines are produced strictly according to national and global standards, and we just take a examination on each equipment prior to shipping and delivery.
Q: How about the value?
A: We are manufactory, and we can give you reduced value than these trade businesses. Aside from, clients from Created in China can get a price reduction.
Q: Do you supply after-sale support?
A: Indeed. The warranty period of time of our machines is 1 yr, and we have a expert after-sale group to immediately and thoroughly solve your issues.
Q: Do you supply equipment operation training?
A: Sure. We can ship specialist engineers to the operating internet site for tools set up, adjustment, and operation training. All of our engineers have passports.
Redirect your dual climbing lines with ISC’s dual redirect pulley. This is the least difficult way to redirect double strains, with swinging aspect panels and side-by-aspect aluminum pulleys. With the wiggling cheek design and style, this enhances the redirect set up properly. Flip on the pulley, faucet the rope on equally legs to connect it and redirect it to the very best line angle for much more performance. The sloped design and style of the higher panel retains the rope pulley and operating appropriately. Created of lightweight aluminum, this pulley is gorgeous and compact, so it is not going to consider up also considerably area on your belt.
Movable Pulley: A pulley that rotates and interprets according to the motion of the pulley or belt. This is generally utilized in blocking and deal with techniques, which I will explain later.
